Site requirements 5, Printer power-up 5, Zebra xi ii-series user’s guide 33 – Zebra Technologies XiII-Series User Manual
Page 45

Press
Display Shows
Action/Explanation
MEDIA TYPE
Setting Media Type Press the right or left oval key to display
other choices.
Default: Continuous
Selections: Continuous,
Non-continuous
This parameter tells the printer the type of media you are
using. Selecting continuous media requires that you include a
label length instruction in your label format (^LLxxxx if you
are using ZPL or ZPL II).
When non-continuous media is selected, the printer feeds
media to calculate label length (the distance between two
detections of the inter-label gap, webbing, or alignment notch
or hole).
SENSOR TYPE
Setting the Sensor Type Press the right or left oval key to
display other choices.
Default: Web
Selections: Web, Mark
This parameter tells the printer whether you are using media
with a web (gap/space between labels, notch, or hole) to
indicate the separations between labels or if you are using
media with a black mark printed on the back. If your media
does not have black marks on the back, leave your printer at
the default (Web).
PRINT METHOD
Selecting Print Method Press the right oval key for the next
value; press the left oval key for the previous value.
Default: Thermal Transfer
Selections: Thermal Transfer,
Direct Thermal
The print method parameter tells the printer the method of
printing you wish to use: direct thermal (no ribbon) or thermal
transfer (using thermal transfer media and ribbon).
NOTE: Selecting direct thermal when using thermal transfer
media and ribbon creates a warning condition, but printing
will continue.
Zebra XiII-Series User’s Guide
33
45
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:35:49 1998
Color profile: Disabled
Composite Default screen