ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 235)

GS-3012/GS-3012F User’s Guide
Command Examples 31-13
gvrp
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for switches to register
necessary VLAN members on ports across the network. Enable this function to permit VLANs groups beyond
the local switch.
An example is shown next.
Enable the IEEE 802.1Q tagged VLAN command to configure tagged VLAN for the switch.
Enable ports one, three, four and five for configuration.
Enable GVRP on the interface.
Figure 31-25 gvrp Command Example
31.8.7 ingress-check
Syntax:
ingress-check
Enables the device to discard incoming frames for VLANs that are not included in a port member set.
An example is shown next.
Enable ports one, three, four and five for configuration.
Enable ingress checking on the interface.
Figure 31-26 ingress-check Command Example
31.8.8 frame-type
Syntax:
frame-type
where
Choose to accept both tagged and untagged incoming frames or just tagged
incoming frames on a port.
An example is shown next.
Enable ports one, three, four and five for configuration.
Enable ingress checking on the interface.
ras(config)# vlan1q gvrp
ras(config)# interface port-channel 1,3-5
ras(config-interface)# gvrp
ras(config)# interface port-channel 1,3-5
ras(config-interface)# ingress-check