ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 221)

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-27
Table 30-6 Command Summary: mvr Commands
COMMAND DESCRIPTION
mvr <1-4094> Enters the MVR (Multicast VLAN
Registration) configuration mode.
exit Exist from the MVR configuration
mode.
group
start-address
end-address
Sets the multicast group range for the
MVR.
inactive Disables MVR settings.
mode Sets the MVR mode (dynamic or
compatible).
name Sets the MVR name for identification
purposes.
no group Disables all MVR group settings.
no group Disables the specified MVR group
setting.
no inactive Enables MVR.
no receiver-port Disables the receiver port(s).
An MVR receiver port can only receive
multicast traffic in a multicast VLAN.
no source-port Disables the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN.
no tagged list> Sets the port(s) to untag VLAN tags.
receiver-port
list>
Sets the receiver port(s).
An MVR receiver port can only receive
multicast traffic in a multicast VLAN.
source-port
list>
Sets the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN.
tagged Sets the port(s) to tag VLAN tags.