ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 201)

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-7
Table 30-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
baudrate <1|2|3|4|5> Changes the console port speed.
Choices are 1 (38400), 2 (19200),
3(9600), 4 (57600) and 5 (115200).
boot config Restarts the system with the specified
configuration file (1 or 2).
configure Accesses Configuration mode.
copy running-config tftp Backs up running configuration to the
specified TFTP server with the specified
file name.
tftp config Restores configuration with the specified
filename from the specified TFTP
server.
flash
file>
Restores firmware via TFTP.
disable Exits Enable (or privileged) mode.
enable Accesses Enable (or privileged) mode.
erase running-config Resets to the factory default settings.
exit Exits Enable (or privileged) mode.
help Displays help information.
history Displays a list of command(s) that you
have previously executed.
igmp-flush Removes all IGMP information.
kick tcp Drops a TCP session.
mac-flush Clears the MAC address table.
Removes all learned MAC address on
the specified port(s).
no arp Flushes the ARP (Address Resolution
Protocol) table.
interface
number>
Clears the interface status of the
specified port(s).
logging Clears the system log.
ping
[band|vlan ]
[size <0-1472>]
[-t]
Sends a Ping request to an Ethernet
device.
reload config Restarts the system with the specified
configuration file.
show