ZyXEL Communications ZyXEL Dimension GS-3012 User Manual
Page 218
GS-3012/GS-3012F User’s Guide
30-24 Introducing the Commands
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
bpdu-control
Units (BPDUs) are used in STP
port states.
cable_diagnostics
Displays whether a cable is
connected to the port (good) or
not (open).
dlf-limit
Enables the Destination Lookup
Failure (DLF) limit.
Sets the interface DLF limit in
packets per second (pps).
egress
set
Sets the outgoing traffic port list
for a port-based VLAN.
exit
Exits from the interface
configuration command set.
flow-control
Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
frame-type
Choose to accept both tagged
and untagged incoming frames
or just tagged incoming frames
on a port.
gvrp
Enables this function to permit
VLAN groups beyond the local
switch.
help
Displays a description of the
interface commands.
igmp-filtering
profile
Sets the IGMP filtering profile for
this port.
igmp-group-limited
Limits the number of multicast
groups.
igmp-group-limited
number
Sets the number of multicast
groups this port is allowed to join.
igmp-immediate-
leave
Enables IGMP immediate leave
on the port.
igmp-querier-mode
Sets the IGMP querier mode of a
port. auto uses the port as an
IGMP query port after it receives
IGMP query packets. fixed
always uses the port as an IGMP
query port. edge stops the
switch from using the port as an
IGMP query port.
inactive
Disables the specified interface
on the switch