ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 223)

GS-3012/GS-3012F User’s Guide
Command Examples 31-1
This chapter describes some commands in more detail.
31.1 Overview
These are commands that you may use frequently in maintaining your switch.
31.2 show Commands
These are the commonly used show commands.
31.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and system up time).
An example is shown next.
Figure 31-1 show system-information Command Example
31.2.2 show hardware-monitor
Syntax:
show hardware-monitor [c|f]
This command displays the current hardware status (such as temperature and voltage levels).
Chapter 31
Command Examples
ras> show system-information
System Name : GS-3012
System Contact :
System Location :
Ethernet Address : 00:13:49:00:00:02
ZyNOS F/W Version : V3.60(LR.1)b0 | 11/11/2005
RomRasSize : 3027468
System up Time : 4:44:50 (1a13da ticks)
Bootbase Version : V3.00 | 01/14/2005
ZyNOS CODE : RAS Sep 27 2005 17:59:19
Product Model : GS-3012