ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 219)

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-25
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
ingress-check Enables the device to discard
incoming frames for VLANs that
are not included in a port
member set.
intrusion-lock Enables intrusion lock on a port
and a port cannot be connected
again after you disconnected the
cable.
mirror Enables port mirroring in the
interface.
dir Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
multicast-limit Enables the interface multicast
limit.
Sets how many multicast packets
the interface receives per
second.
name Sets a name for your interface.
Enter a descriptive name (up to
nine printable ASCII characters).
no
bandwidth-limit Disables bandwidth limit on the
switch.
broadcast-limit Disables broadcast storm control
limit on the switch.
dlf-limit Disables destination lookup
failure (DLF) on the switch.
egress set Disables the outgoing traffic port
list for a port-based VLAN.
flow-control Disables flow control on the
switch.
gvrp Disables GVRP on the switch.
igmp-filtering profile Disables IGMP filtering on the
port.
igmp-group-limited Disables IGMP group limitation.
igmp-immediate-leave Disables IGMP immediate leave
on the port.
inactive
Enables the specified interface
on the switch.