ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 233)

GS-3012/GS-3012F User’s Guide
Command Examples 31-11
Enable ports one, three, four and five for configuration.
Set the BPDU control to tunnel, to forward BPDUs received on ports one, three, four and five.
Figure 31-21 interface bpdu-control Command Example
31.8.3 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit
where
Enables broadcast storm control limit on the switch.
Sets how many broadcast packets the interface receives per second.
An example is shown next.
Enable port one for configuration.
Enable broadcast control.
Set the number of broadband packets the interface receives per second
Figure 31-22 broadcast-limit Command Example
31.8.4 bandwidth-limit
Syntax:
bandwidth-limit
bandwidth-limit pir
bandwidth-limit cir
bandwidth-limit egress
where
Enables bandwidth control on the switch.
Sets the maximum bandwidth allowed for outgoing traffic (egress) or
incoming traffic (ingress) on the switch.
An example is shown next.
Enable port one for configuration.
ras(config)# interface 1,3-5
ras(config-interface)# bpdu-control tunnel
ras(config-interface)#
ras(config)# interface port-channel 1
ras(config-interface)# broadcast-limit
ras(config-interface)# broadcast-limit 21