ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 203)

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-9
Table 30-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
igmp-query-mode Displays IGMP query mode settings on
the port(s).
ip Displays IP related information.
TCP Displays the switch’s current TCP
sessions.
UDP Displays the switch’s current UDP
sessions.
ip arp Displays the ARP table.
ip route Displays IP routing information.
ip route static Displays IP static route information.
lacp Link Aggregation Control Protocol.
logging Displays system logs.
loginPrecedence Displays login precedence settings.
logins Displays login account information.
mac address-table
static Displays static MAC address table.
You can sort by MAC address, VID or
port.
address-table Displays MAC address table.
You can sort by MAC address, VID or
port.
address-table count Displays the total number of MAC
addresses in the MAC address table.
mac-aging-time Displays MAC learning aging time.
multi-login Displays multi-login information
multicast Displays multicast settings.
mvr Displays all MVR (Multicast VLAN
Registration) settings.
Displays specified MVR information.
plt Displays Packet Loop Test (PLT).
policy Displays all policy related information.
Displays the specified policy related
information.
port-access-
authenticator
Displays all port authentication settings.
Displays port authentication settings on
the specified port(s).
port-security Displays all port security settings.