ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 215)

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-21
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
type
interface, switch,
authentication, ip>
Sets the device to generate a
category of logs.
type
interface, switch,
authentication, ip>
facility <0-7> Sets the facility (file) on the syslog
server to which the switch sends a
category of logs.
time Sets the time in hour, minute and
second format.
date Sets the date in year, month and
day format.
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly known as
GMT) and your time zone.
timesync Sets the time server protocol.
server Sets the IP address of your time
server.
trunk Activates a trunk group.
interface list>
Adds a port(s) to the specified
trunk group.
lacp
Enables LACP for a trunk group.
interface
list> timeout
Defines the port number and LACP
timeout period.
vlan <1-4094> Enters the VLAN configuration
mode. See Section 30.9.4 for more
information.
vlan-type <802.1q|port-based> Specifies the VLAN type.
vlan1q gvrp Allows VLAN groups beyond the
local switch.
port-isolation Enables port isolation.
30.9.4 config-vlan Commands
The following table lists the config-vlan commands in configuration mode.
Table 30-4 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
vlan <1-4094> Creates a new VLAN group.
exit Leaves config-vlan mode.