ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 207)

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-13
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
profile
start-address
end-address
Sets the range of multicast
address(es) in a profile.
igmp-snooping Enables IGMP snooping.
unknown-multicast-
frame
Sets how to treat traffic from
unknown multicast group.
interface port-channel
list>
Enables a port or a list of ports for
configuration. See Section 30.9.5
for more details.
ip address Sets the IP address and subnet
mask of the out-of-band
management port.
address default-
gateway
Sets the default gateway’s IP
address for the out-of-band
management port.
name-server Sets the IP address of a domain
name server.
route Creates a static route.
[metric ]
[name ]
[inactive]
Sets the metric of a static route or
deactivates a static route.
lacp Enables Link Aggregation Control
Protocol (LACP).
system-priority <1-65535> Sets the priority of an active port
using LACP.
loginPrecedence
LocalRADIUS |
RADIUSOnly>
Select which database the switch
should use (first) to authenticate a
user.
logins username
password Configures up to four read-only
login accounts.
mac-aging-time <10-3000> Sets learned MAC aging time.
mac-filter name mac
vlan
drop
Configures a static MAC address
port filtering rule.