ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 200)

GS-3012/GS-3012F User’s Guide
30-6 Introducing the Commands
In User mode, enter the exit command to log out of the CLI.
30.9 Command Summary
The following sections summarize the commands available in the switch together with a brief description of each
command. Commands listed in the tables are in the same order as they are displayed in the CLI. See the related
section in the User’s Guide for more background information.
30.9.1 User Mode
The following table describes the commands available for User mode.
Table 30-1 Command Summary: User Mode
COMMAND DESCRIPTION
enable Accesses Enable (or privileged) mode.
exit Logs out from the CLI.
help Displays help information.
history Displays a list of previously command(s)
that you have executed. The switch
stores up to 256 commands in history.
ping
[
band|vlan ]
[size <0-1472>]
[-t]
Sends a Ping request to an Ethernet
device.
show hardware-monitor Displays current hardware monitor
information with the specified
temperature unit (Celsius C or
Fahrenheit F).
ip Displays IP related information.
system-information Displays general system information.
ssh <1|2> <[user@]dest-ip> Connects to an SSH server with the
specified SSH version.
traceroute
[in-band|out-of-
band|vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
30.9.2 Enable Mode
The following table describes the commands available for Enable mode.