ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 204)

GS-3012/GS-3012F User’s Guide
30-10 Introducing the Commands
Table 30-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
Displays port security settings on the
specified port(s).
radius-server Displays RADIUS server settings.
remote-management Displays all secured client information.
Displays the specified secured client
information.
running-config Displays current operating configuration.
service-control Displays service control settings.
snmp-server Displays SNMP settings.
spanning-tree config Displays Spanning Tree Protocol (STP)
settings.
ssh Displays general SSH settings.
key Displays the SSH public and private
keys
known-hosts Displays known SSH hosts information.
session Displays current SSH session(s).
system-information Displays general system information.
time Displays current system time and date.
timesync Displays time server information.
trunk Displays link aggregation information.
vlan Displays the status of all VLANs.
Displays the status of the specified
VLAN.
vlan1q gvrp Displays GVRP setting.
port-isolation Displays port isolation setting.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
traceroute
[in-band|out-of-
band|vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
write memory Saves the configuration to the
configuration file the switch is currently
using.
Saves the configuration to the specified
configuration file on the switch.