ZyXEL Communications ZyXEL Dimension GS-3012 - Manual (Page 161)

GS-3012/GS-3012F User’s Guide
Maintenance 23-3
23.5 Load Factory Defaults
Press the Click Here button next to Load Factory Defaults to clear all switch configuration information you
configured and return to the factory defaults. The following message appears.
Figure 23-5 Confirm Load factory Defaults
Click OK to go to the next screen.
Figure 23-6 Close Browser After Load Factory Defaults
Click Yes to close this window. Open a new browser window to access the switch web configurator again. You
may need to change the IP address of your computer to be in the same subnet as that of the default switch IP
address (192.168.1.1).
23.6 Reboot System
Reboot System allows you to restart the switch without physically turning the power off. Press the Click Here
button next to Reboot System to display the next screen.
Figure 23-7 Confirm Restarting of the Switch