Broadcast storm control, Introducing broadcast storm control, Configuring broadcast storm control – ZyXEL Communications ZyXEL Dimension GS-3012 User Manual
Page 109: Chapter 12 broadcast storm control, 1 introducing broadcast storm control, 2 configuring broadcast storm control

GS-3012/GS-3012F User’s Guide
Broadcast Storm Control
12-1
Chapter 12
Broadcast Storm Control
12.1 Introducing Broadcast Storm Control
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure (DLF) packets
the switch receives per second on the ports. When the maximum number of allowable broadcast, multicast and/or
DLF packets is reached per second, the subsequent packets are discarded. Enable this feature to reduce broadcast,
multicast and/or DLF packets in your network. You can specify limits for each packet type on each port.
12.2 Configuring Broadcast Storm Control
Click Advanced Application, Broadcast Strom Control in the navigation panel to display the screen as shown
next.
Figure 12-1 Broadcast Storm Control
The following table describes the labels in this screen.