Telenetics 56 - Manual (Page 47)

AT Commands
Page 39
+VCID - Caller ID (CID)
This command controls the reporting and presentation of data associated with the Caller
ID services in the Incoming Call Line ID (ICLID) data format for the next call.
Syntax VCID=
Defined Values
Decimal number corresponding to the selected option.
0 Select Data Mode (Default.) Disable Caller ID
reporting. (Default.)
1 Enables Caller ID with formatted presentation to the
DTE. The modem presents the data items in a
pair format. The expected pairs are
date, time, name, and caller code (telephone number),
2 Enables Caller ID with unformatted presentation to the
DTE
Reporting Current or Selected Values
Command: +VCID?
Response: +VCID:
Example: +VCID: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VCID=?
Response:
+VCID: ( range)
Example: +VCID: (0-2)
+VRID - Report Retrieved Caller ID (CID)
This command reports the data associated with the Caller ID services in the Incoming
Call Line ID (ICLID) data format for the last received call.
Syntax +VRID=
Defined Values
Decimal number corresponding to the selected option.
0 Reports Caller ID with formatted presentation to the
DTE. The modem presents the data items in a
pair format. The expected pairs are
date, time, name, and caller code (telephone number),
1 Reports Caller ID with unformatted presentation to the
DTE.
2
Reporting Supported Range of Parameter Values
Command: +VRID=?
Response:
+VRID: ( range)
Example: +VRID: (0,1)