Telenetics 56 - Manual (Page 143)

AT Commands
Page 135
Code Message Meaning
(See S95 and Xn.)
196 +MRR: 29333 The modem has connected to the line at 29333 bps and carrier reporting is enabled.
(See S95Band Xn.)
197 +MRR: 30667 The modem has connected to the line at 30667 bps and carrier reporting is enabled.
(See S95 and Xn.)
198 +MRR: 33333 The modem has connected to the line at 33333 bps and carrier reporting is enabled.
(See S95 and Xn.)
199 +MRR: 34667 The modem has connected to the line at 34667 bps and carrier reporting is enabled.
(See S95 and Xn.)
200 +MRR: 37333 The modem has connected to the line at 37333 bps and carrier reporting is enabled.
(See S95 and Xn.)
201 +MRR: 38667 The modem has connected to the line at 38667 bps and carrier reporting is enabled.
(See S95 and Xn.)
202 +MRR: 41333 The modem has connected to the line at 41333 bps and carrier reporting is enabled.
(See S95 and Xn.)
203 +MRR: 42667 The modem has connected to the line at 42667 bps and carrier reporting is enabled.
(See S95 and Xn.)
204 +MRR: 45333 The modem has connected to the line at 45333 bps and carrier reporting is enabled.
(See S95 and Xn.)
205 +MRR: 46667 The modem has connected to the line at 46667 bps and carrier reporting is enabled.
(See S95 and Xn.)
206 +MRR: 49333 The modem has connected to the line at 49333 bps and carrier reporting is enabled.
(See S95 and Xn.)
207 +MRR: 50667 The modem has connected to the line at 50667 bps and carrier reporting is enabled.
(See S95 and Xn.)
208 +MRR: 53333 The modem has connected to the line at 53333 bps and carrier reporting is enabled.
(See S95 and Xn.)
209 +MRR: 54667 The modem has connected to the line at 54667 bps and carrier reporting is enabled.
(See S95 and Xn.)
Notes:
1. See Vn for result code selection, i.e., short form (result code) or verbose/extended (result message).
2. See Wn for extended connect message control
3. See S95 for extended result code enabling options (which override some Wn commands).
4. See Xn for extended result code subset enabling options.
5. See \Vn for single line connect message enable option.
6. See +MR for modulation reporting control.