Telenetics 56 - Manual (Page 25)

Using the Modem’s Security Feature
Page 17
2.
Type AT$Un<password> and press the Enter key. In this line:
™ n is a user number from 1 to 20.
™ <password> is a password you want to assign to the user. It can be up to 9 alphanumeric
characters long and is not case-sensitive.
Example: AT$U2ze68nam assigns the password ze68nam to user 2.
4.
Repeat step 3 for each additional user whose password you want to set up.
Viewing Security Status
There may be times when you want to view whether security and Superuser Mode are enabled. To view
the security status, type the command AT$D? and press the Enter key. Your Premier 56 modem
responds with messages that show whether security and Superuser Mode are enabled. The following
examples show the possible responses that can appear.
Security and Superuser
Mode are enabled. Security is disabled and
Superuser Mode is enabled Security is enabled and
Superuser Mode is disabled Security and Superuser
Mode are both disabled
SECURITY ON
SUPERUSER
SECURITY OFF
SUPERUSER
SECURITY ON
NON-SUPERUSER
SECURITY OFF
NON-SUPERUSER