Telenetics 56 - Manual (Page 186)

AT Commands
Page 178
Example Sessions
Tables A-27 and A-28 show the typical command and responses for sending and
receiving two pages, respectively.
Table A-27. Send Two Pages, 1-D, No Errors
DTE Command DCE Response Local DTE Action Remote Station
Action
AT+CLASS=2 OK Set Class 2 x
AT+FLID="" OK Set local ID
AT
+FCON
[+FCSI:""]
+FDIS:
OK Off-hook, dial
Send CNG
Detect flags
[Get CSI]
Get DIS Answer,
Send [CED]
V.21 flags
[CSI]
DIS
AT+FDT
<1st page data>
+FDCS:
CONNECT
OK [Send TSI]
Send DCS
Send TCF
Get CFR
Send carrier
Send page data
[Get TSI]
Get DCS
Get TCF
Send CFR
Receive carrier
Receive page data
AT+FET=0 +FPTS:1 OK Send RTC Get MPS
Get MCF Get RTC Get MPS
Send MCF
AT+FDT <2nd page data>
CONNECT OK Send carrier Send
page data Receive carrier
Receive page data
AT+FET=2 +FPTS:1 +FHNG:0 OK Send RTC Send EOP
Get MCF Send DCN
Hang up Get RTC Get EOP
Send MCF Get DCN
Hang up