6 megamodule revision, Section 5.6, Product preview – Texas Instruments TMS320C6454 User Manual
Page 82
www.ti.com
PRODUCT PREVIEW
5.6 Megamodule Revision
TMS320C6454
Fixed-Point Digital Signal Processor
SPRS311A – APRIL 2006 – REVISED DECEMBER 2006
The version and revision of the C64x+ Megamodule can be read from the Megamodule Revision ID
Register (MM_REVID) located at address 0181 2000h. The MM_REVID register is shown in
and described in
. The C64x+ Megamodule revision is dependant on the silicon revision being
used. For more information, see the TMS320C6455/54 Digital Signal Processor Silicon Errata (literature
number
31
16 15
0
VERSION
REVISION
(A)
R-1h
R-n
LEGEND: R = Read only; -n = value after reset
A.
The C64x+ Megamodule revision is dependant on the silicon revision being used. For more information, see
the TMS320C6455/54 Digital Signal Processor Silicon Errata (literature number
Figure 5-5. Megamodule Revision ID Register (MM_REVID) [Hex Address: 0181 2000h]
Table 5-3. Megamodule Revision ID Register (MM_REVID) Field Descriptions
Bit
Field
Value
Description
31:16
VERSION
1h
Version of the C64x+ Megamodule implemented on the device. This field is always read as 1h.
15:0
REVISION
Revision of the C64x+ Megamodule version implemented on the device. The C64x+ Megamodule
revision is dependant on the silicon revision being used. For more information, see the
TMS320C6455/54 Digital Signal Processor Silicon Errata (literature number
).
C64x+ Megamodule
82