RAD Data comm LRS-24 - Manual (Page 80)

Chapter 4 Management via the CM-2 Module LRS-24 Installation and Operation Manual
4-16 Supervision Terminal Operating Instructions
If it is necessary to manage LRS-24 by means of a terminal, the operator of the
network management station can transfer the control. For generic SNMP
management stations, use the MIB browser function to change the parameter
private.radWan.modmSys.modmSystem.modmHub.modmHubParam.
modmHubController
to the value corresponding to terminal management.
For CM-2 management commands, see Appendix D.
This method of transferring control to the supervision terminal is valid only for
SMOD modems.
The remote connection involves an update in the management station screen in
order to receive traps.
Note
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com