RAD Data comm LRS-24 - Manual (Page 133)

LRS-24 Installation and Operation Manual Appendix D CM-2 Management Commands
Defining Auto-Configuration D-31
Sending Configuration Files
➤ To send a configuration file to the LRS-24 hub:
1. Type 2 on the Auto-Configuration Menu.
The Send File to Hub screen appears (see Figure D-32).
SEND FILE TO HUB
Send file via: [N/A/TFTP/XMODEM]
Save file to HUB: [NO/YES]
Execute configuration: [No/YES]
To elect an option press ‘f’ for forward or ‘b’ for backward.
Figure D-32. Send File To Hub Screen
2. Select at least one of the following:
− YES to save the file.
− YES to execute the file (see Hub Configuration Operations/Editing the
Configuration.
➤ To send the file by TFTP:
1. Select TFTP.
The Download via LAN Screen appears (see Figure D-33)
Download via LAN
IP Address of TFTP server: [000.000.000.000]
File name: [filename]
Figure D-33. Download via LAN Screen
2. Enter the IP Address of TFTP server and File name.
A download confirmation message appears (see Figure D-34)
Download progress: [size] byte transferred
The download action was completed successfully.
Figure D-34. Download Confirmation message Screen
➤ To send file by XMODEM:
1. Select XMODEM.
A message appears that you can start sending the file (see Figure D-35)
CM2> The CM2 is waiting to the XMODEM data: start the process within one min
Figure D-35. Start Sending the File Message
2. If Execute was selected, the process will continue as described in Hub
Configuration Operations/Editing the Configuration.
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com