Cm2 download via lan – RAD Data comm LRS-24 User Manual
Page 112
Appendix D CM-2 Management Commands
LRS-24 Installation and Operation Manual
D-10
Defining CM-2 Download Parameters
Table D-4. Download Main Menu Options
Selection
Description
1
CM2 or Modems Download via LAN
Enables downloading the software version for CM-2 or modems from
the TFTP server
2
CM2 or Modems Download via MODEM
Enables downloading the software version for CM-2 or modems via
XMODEM protocol (the terminal connected to the CM-2 must be
configured at 38.4 kbps, 8-bit, no parity, 1 stop bit)
3
Modems Download via CM2 FLASH
Enables downloading the software version for files that were previously
saved in CM-2 FLASH.
4
Change CM-2 software version
Change to a different version of CM-2 software
5
View existing versions in the CM2
View list of software versions
CM2 Download via LAN
➤
To download via LAN:
1. Type 1.
The Download via LAN screen appears.
Download via LAN
IP Address of TFTP server: 000.000.000.000
File name: Insert file name for download
Romote modems: N/A
Figure D-5. Download via LAN Screen
2. Type the TFTP server IP address – a dotted quad format (four groups of digits
in the range of 0 to 255, separated by periods).
3. Press
4. <Tab> to the File Name field.
5. Type the name of the file to be transferred to the CM-2 –supplied by RAD or
another authorized body.
6. Press
After typing the data for all of the parameters, press
process. After downloading, the CM-2 will perform a reset, and the new version will
be loaded. The CM-2’s seven-segment screen displays a rotating
complete.
Note
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com