RAD Data comm LRS-24 - Manual (Page 126)

Appendix D CM-2 Management Commands LRS-24 Installation and Operation Manual
D-24 Defining Auto-Configuration
D.12 Defining Auto-Configuration
Purpose
Defines Auto-Configuration for modems or LRS-24 hub:
• For all the modems in the LRS-24 hub
• For any number of modems, selected by type of modem, or specific list of
modems.
You can set other modems/hubs with the file configuration that ws created by a
specific modem/hub.
You can perform the following activities with the auto-configuration file:
• Save to a file on the CM-2 or on a remote station for future use
• Read to the screen
• Write to a file
• Send and receive to/from a station.
You can perform Auto-Configuration by file transfer or from a screen.
The number of files on CM-2 will be limited to available memory space (up to
three modem files and two hub files).
Error check and masking will be performed on the received file before the
configuration is executed.
Format
DEF CFG
Procedure
➤ To define the Auto-Configuration options:
Type: NODE 13 DEF CFG .
The Auto-Configuration Menu screen appears (see Figure D-22).
AUTO CONFIGURATION MENU
1. Edit configuration
2. Send file to HUB
3. Create file from existing configuration
4. View configuration files in HUB
Enter Auto Configuration option number ->
Figure D-22. Auto Configuration Menu Screen
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com