NEC MH4500 - Manual (Page 62)

3-18 Configuring Your System
Adapter Setup Screen
Description Recommended Setting or Display Only Your Configuration
SCAM Support On
Parity On
Host SCSI ID 7
Scan Order Low to High
Removable Media
Support None
CHS Mapping SCSI Plug and Play Mapping
Spinup Delay (sec) 2
Help
Restore Default Setup
Exit This Menu
3. Highlight the function you want to change and press Enter . You are
prompted to save changes when you exit the configuration utility.
To change device configuration parameters, perform the following steps.
1. At the SCSI Configuration Utility Menu, select “Device Selections” and
press
Enter . The Devices 0 to 7 screen displays.
2. Select the SCSI device you are reconfiguring and press Enter .
T If you are configuring SCSI Hard Disk Drives, see the following "SCSI
Hard Disk Drives" table.
T If you are configuring SCSI Removable Media Devices, see the
following "SCSI Removable Media Devices" table for recommended
settings.