NEC MH4500 - Manual (Page 153)

Emergency Management Port C-7
Main EMP Window
The main EMP window provides a graphical user interface (GUI) to access
server control operations and to launch the management plug-ins. At the top of
the GUI is the menu and tool bar. These provide the options to initiate plug-ins
and other support features. A status bar at the bottom displays connection
information like server name, line status, and mode.
Toolbar
The tool bar buttons of the EMP main window combine server control and
management plug-in options available from the Connect and Action menus as
follows.
Generates the Connect dialog to allow connection to a selected server.
Disconnects from the currently connected server.
Generates the Power On/Off dialog.
Generates the Reset dialog.
Launches the SEL viewer.
Launches the SDR viewer.
Launches the FRU viewer.
Opens the phonebook.
Opens online help.
Status Bar
The status bar displays at the bottom of the current window. It contains the
following status information.
T Server Name: the name of the server (stored in the Phonebook)
connected to.
T Line: the type of line connection (direct or modem).
T Mode: either Redirect of EMP, depending on whether the EMP has
control of the COM 2 port.
T Line Status: gives status information on the server connection. For
example, if a server is connected, the status bar says "Connected."
Otherwise, the line is blank.