NEC MH4500 - Manual (Page 50)

3-6 Configuring Your System
Primary IDE Master and Slave Submenu
Feature Choices Description Your Setting
Ultra DMA Mode Disabled
Enabled Selects the Ultra DMA Mode for
moving data to and from the drive.
Keyboard Submenu
The following table shows the settings for the Keyboard submenu.
Keyboard Submenu
Feature Choices Description Your Setting
NumLock Auto
On
Off Selects power-on state for Num
Lock.
Key Click Disabled
Enabled Enables or disables key click.
Keyboard auto-repeat
rate 30/sec
26.7/sec
21.8/sec
18.5/sec
13.3/sec
10/sec
6/sec
2/sec Selects the number of times per
second a key repeats while it is
held down.
Keyboard auto-repeat
delay 1/4 sec
1/2 sec
3/4 sec
1 sec Selects delay before key repeat.
Advanced Menu
The following table shows the Advanced Menu settings.
Advanced Menu
Feature Choices Description Your Setting
Plug and Play OS No
Yes Select Yes if you are booting a
Plug and Play capable operating
system.
Reset Configuration
Data No
Yes Select Yes if you want to clear the
system configuration data during
next boot. System automatically
resets to No in next boot.
PCI Configuration Press Enter Refer to “PCI Configuration
Submenu.”
I/O Device
Configuration Press Enter Refer to “I/O Device Configuration
Submenu.”