NEC MH4500 - Manual (Page 141)

System Setup Utility B-9
2. Press the spacebar or Enter .
The functions of the selected device along with possible choices and the
resources associated with those choices displays.
To make a modification:
1. Highlight the function in the Configuration window (see the following
figure).
2. Press the space bar or Enter or double-click on the entry (this updates the
choice and resource lists).
3. Press the tab key to get to the Choice list, and press Enter.
4. Use the arrow keys to select a proper choice, and press Enter again.
5. If the choice allows multiple possible values for a particular resource, use
the hot key to select a resource, and press the spacebar or double click on the
resource.
6. Select the desired resource, and click OK .
Configuration Window
Recommended Resource Settings
The following table shows the recommended RCA system board settings for a
sample system and provides a place for you to record any changes you make to
the settings.