NEC MH4500 - Manual (Page 143)

System Setup Utility B-11
System Resource Usage
Clicking on the Resource Use button in the Configuration window displays the
System Resource Usage window (see the following figure). This window shows
what resources each device is consuming. This information is useful for
choosing resources if a conflict occurs. Devices can be organized according to
the resources the user wants to examine using the options in the Resource
section of the screen.
System Resource Usage Window
Multiboot Add-in (MBA) Window
The MBA lets you set the system boot priority. The boot priority is the order the
BIOS uses to boot the operating system from various devices in your system.
Set the boot priority of your system as follows.
1. From the SSU Main Menu, launch the MBA by selecting the “Boot
Devices” task under the MBA heading in the task box. Click OK.
2. When the MBA window displays, the “Boot Device Priority” window lists
the current boot priority order. The “Hard Drives” window lists the hard disk
drive(s) in your system. During bootup, BIOS searches the list of device
types shown in the “Boot Device Priority” list, starting with the first device
on the list. When BIOS gets to Hard Drives, the BIOS tries each device
shown in the “Hard Drives” list, starting at the top of the list.
3. To change the priority of an entry in either list, select the entry and press +
(plus) to move the device up in the list or press - (minus) to move the device
down the list.