NEC MH4500 - Manual (Page 154)

C-8 Emergency Management Port
EMP Console Main Menu
The EMP Console Main menu has the following menus.
T File

Exit - Exits the EMP.
T Connect

Disconnect - disconnects the server connection.

[Re]Connect - raises the connect dialog.

A list of the five most recent connections - can click on one of the
five servers most recently connected to. A connection to the selected
server is initiated.
T Action

Power On/Off - powers the server on or off with post-power-up
options.

Reset - resets the server with post-reset options.

SEL Viewer - opens the SEL viewer.

SDR Viewer - opens the SDR viewer.

FRU Viewer - opens the FRU viewer.

Phonebook - opens the phonebook dialog.
T Help - provides version information and help topics for the EMP.
Server Control Operations
Three server control operations are available from the menu or toolbar of the
main EMP window: remote server connection, powering the server on and off,
and resetting the server. The server console mode can also be switched between
EMP active and BIOS redirect modes through post-power-up and reset options.
Connect to Remote Server
When you select [Re]Connect from the Connect menu, the Connect dialog (see
the following figure) allows you to connect to a selected server. If the client
machine is already connected to a server, initiating connection generates a
warning message. It lets you know that the existing connection will be
terminated if you continue trying to initiate the new connection. You are
prompted to enter the EMP password whenever a connection is attempted.