NEC MH4500 - Manual (Page 163)

Emergency Management Port C-17
What You Need to Do
You can run the utility directly from the configuration software CD or from
diskettes you create from the CD.
If you choose to run the FRUSDR Load Utility from a diskette, you must copy
the utility from the CD and follow the instructions in the included
README.TXT file.
If your diskette drive is disabled or improperly configured, you must use BIOS
Setup to enable it. If necessary, you can disable the drive after you are done with
the FRUSDR utility.
How You Use the FRUSDR Load Utility
The utility
T is compatible with ROM-DOS Ver. 6.22, MS-DOS Ver. 6.22, and later
versions
T accepts CFG, SDR, and FRU load files (the executable file for the utility
is frusdr.exe)
T requires the following supporting files

one or more .FRU files describing the system’s field replaceable
units

a .cfg file describing the system configuration

an .sdr file describing the sensors in the system
Command Line Format
The basic command line format is
frusdr [-?] [-h] [-d {dmi, fru, sdr}] [-cfg filename.cfg] [-fru filename.fru]
The commands and command descriptions are given in the following table.
Command Line Format
Command Description
frusdr Utility name
-? or -h Displays usage information
-d {dmi, fru, sdr} Displays requested area only
-cfg filename.cfg Uses custom .CFG file
-p Pause between blocks of data
-v Verbose, display any additional details