NEC MH4500 - Manual (Page 48)

3-4 Configuring Your System
Setup Menu Keys
Key Function in Setup Menu
Up or down arrow keys Move cursor up and down. The cursor moves only to the
settings that you can change.
- Select the previous value for the field.
+ Select the next value for the field.
F9 Load default configuration values for this menu.
F10 Save configuration values and exit.
Enter Execute command or Select submenu.
The following BIOS Setup Configuration tables show the default settings for the
BIOS Setup Utility. Recommended values are bold. The tables also provide a
space for you to record any changes you make to these settings.
Main Menu
The following table shows the Main Menu settings.
Main Menu
Feature Choices Description Your Setting
System Time HH:MM:SS Sets the system time.
System Date MM/DD/YYYY Sets the system date.
Legacy Diskette A: Disabled
360KB
1.2 MB
720KB
1.44 MB
2.88 MB Selects the diskette type.
Legacy Diskette B: Disabled
360KB
1.2 MB
720KB
1.44 MB
2.88 MB Selects the diskette type.
Hard Disk Pre-delay Disabled
3, 6, 9, 12, 15, 21, or
30 seconds Adds a delay before the first BIOS
access of a hard drive. Some hard
drives hang if accessed before they
initialize. The delay allows the drive
to initialize after power up, before
being accessed.
Primary IDE Master Press Enter Refer to “Primary IDE Master and
Slave Submenu.”
Primary IDE Slave Press Enter Refer to “Primary IDE Master and
Slave Submenu.”
Keyboard Features Press Enter Refer to “Keyboard Submenu.”
Processor Information Press Enter Information for all processors is