NEC MH4500 - Manual (Page 57)

Configuring Your System 3-13
System Management Submenu
The following table lists the settings for the System Management Submenu.
System Management Submenu
Feature Choices Description Your Setting
System Event Logging Disabled
Enabled When enabled, system events will
be logged by BIOS and BMC.
Clear Event Log Yes
No Clears the system event log (SEL)
in BMC if Yes is selected.
Assert NMI on AERR Disabled
Enabled When enabled, generates a
nonmaskable interrupt (NMI) on an
address parity error (AERR).
Assert NMI on BERR Disabled
Enabled When enabled, generates an NMI
on a bus error (BERR).
Assert NMI on PERR Disabled
Enabled When enabled, generates an NMI
on a parity error (PERR). To
activate, the system error (SERR)
option must be enabled.
Assert NMI on SERR Disabled
Enabled When enabled, generates an NMI
on SERR.
FSB ECC Check by
Chipset Disabled
Enabled Enables host single and multi-bit
error checking and reporting
feature in the chipset.
FSB ECC Check by
Processor Disabled
Enabled Enables host single and multi-bit
error checking and reporting
feature in the processors.
Server Management
Information Press Enter Displays system serial and part
numbers and server management
controller revisions.