NETGEAR 7300 Series - Manual (Page 319)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-31
202-10009-01_060204
Switching show traplog Privileged
EXEC show logging
Switching config sysname Global
Config snmp-server sysname
Switching config syslocation Global
Config snmp-server location
Switching config syscontact Global
Config snmp-server contact
Switching ping Privileged
EXEC and
User
EXEC ping
Switching reset system Privileged
EXEC reload
Switching transfer upload mode tftp> Privileged
EXEC copy { { nvram:errorlog |
nvram:msglog | nvram:startup-config
| nvram:traplog } } | {
nvram:startup-config | system:image |
nvram:sshkey-rsa1 |
nvram:sshkey-rsa2 |
nvram:sshkey-dsa |
nvram:sslpem-root |
nvram:sslpem-server |
nvram:sslpem-dhweak |
nvram:sslpem-strong } |
{system:running-config
nvram:startup-config}
Switching transfer upload serverip
Switching transfer upload path
Switching transfer upload filename
Switching transfer upload datatype errorlog | msglog | traplog>
Switching transfer upload start
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax