NETGEAR 7300 Series - Manual (Page 220)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-38 Routing Commands
202-10009-01_060204
IP Address Is an IP address representing the subnet configuration of the
router interface. This value was configured into the unit.
Subnet Mask Is a mask of the network and host portion of the IP address for the
router interface. This value was configured into the unit.
Routing Mode Is the administrative mode of router interface participation. The
possible values are enable or disable. This value was configured
into the unit.
Administrative Mode Is the administrative mode of the specified interface. The possible
values of this field are enable or disable. This value was config-
ured into the unit.
Forward Net Directed Broadcasts Displays whether forwarding of network-directed
broadcasts is enabled or disabled. This value was configured into
the unit.
Active State Displays whether the interface is active or inactive. An interface
is considered active if its link is up and it is in forwarding state.
Link Speed Data Rate Is an integer representing the physical link data rate of the speci-
fied interface. This is measured in Megabits per second (Mbps).
MAC Address Is the burned in physical address of the specified interface. The
format is 6 two-digit hexadecimal numbers that are separated by
colons.
Encapsulation Type Is the encapsulation type for the specified interface. The types
are: Ethernet or SNAP.
show ip interface brief
This command displays summary information about IP configuration settings for all ports in the
router. This command takes no options.
Format show ip interface brief
Mode
Privileged EXEC and User EXEC
Slot/Port The interface being displayed on the row.
IP Address The IP address of the routing interface in 32-bit dotted decimal
format.
IP Mask The IP mask of the routing interface in 32-bit dotted decimal for-
mat.