NETGEAR 7300 Series - Manual (Page 239)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands 9-57
202-10009-01_060204
Format
no vlan routing
Mode VLAN Database
ip vrrp
This command sets the virtual router ID on an interface for Virtual router configuration in the
router. The parameter is the virtual router ID which has an integer value range from 1 to
255.
Default There is no default value for vrID.
Format
ip vrrp <vrID>
Mode Interface Config
no ip vrrp
This command removes all VRRP configuration details of the virtual router configured on a
specific interface. The parameter is the virtual router ID which has an integer value ranges
from 1 to 255.
Format
no ip vrrp <vrID>
Mode Interface Config
ip vrrp authentication
This command sets the authorization details value for the virtual router configured on a specified
interface. The parameter {none | simple} specifies the authorization type for virtual router
configured on the specified interface. The parameter [key] is optional, it is only required when
authorization type is simple text password. The parameter is the virtual router ID which
has an integer value ranges from 1 to 255.
Default The default value for authorization type is No authorization.
Format ip vrrp <vrID> authentication {none | simple }
Mode
Interface Config
no ip vrrp authentication
This command sets the default authorization details value for the virtual router configured on a
specified interface.
Format
no ip vrrp <vrID> authentication