NETGEAR 7300 Series - Manual (Page 187)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands 9-5
202-10009-01_060204
no area stub
This command deletes a stub area for the specified area ID.
Format no area <areaid> stub
Mode
Router OSPF Config
area stub summarylsa
This command configures the Summary LSA mode for the stub area identified by . The
Summary LSA mode is configured as enabled.
Default Disabled
Format area <areaid> stub summarylsa
Mode
Router OSPF Config
no area stub summarylsa
This command configures the default Summary LSA mode for the stub area identified by
.
Format no area <areaid> stub summarylsa
Mode
Router OSPF Config
area virtual-link
This command creates the OSPF virtual interface for the specified and . The
parameter is the IP address of the neighbor.
Format
area <areaid> virtual-link
Mode Router OSPF Config
no area virtual-link
This command deletes the OSPF virtual interface from the given interface, identified by
and . The parameter is the IP address of the neighbor.
Format no area <areaid> virtual-link
Mode
Router OSPF Config