NETGEAR 7300 Series - Manual (Page 142)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-76 Switching Commands
202-10009-01_060204
Mode
Global Config
vlan protocol group add protocol
This command adds the to the protocol-based VLAN identified by . A group
may have more than one protocol associated with it. Each interface and protocol combination can
only be associated with one group. If adding a protocol to a group causes any conflicts with
interfaces currently associated with the group, this command will fail and the protocol will not be
added to the group. The possible values for protocol are ip, arp, and ipx.
Default none
Format
vlan protocol group add protocol
Mode Global Config
no vlan protocol group add protocol
This command removes the from this protocol-based VLAN group that is identified by
this . The possible values for protocol are ip, arp, and ipx.
Format no vlan protocol group add protocol
col>
Mode Global Config
vlan protocol group remove
This command removes the protocol-based VLAN group that is identified by this .
Format
vlan protocol group remove
Mode Global Config
vlan pvid
This command changes the VLAN ID per interface.
Default
1
Format vlan pvid <1-4094>
Mode
Interface Config