NETGEAR 7300 Series - Manual (Page 109)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-43
202-10009-01_060204
Default
Enabled
Format port-channel linktrap { | all}
Mode
Global Config
no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a
logical slot and port for a configured port-channel. The option
all sets every configured port-
channel with the same administrative mode setting.
Format
no port-channel linktrap { | all}
Mode GlobalConfig
port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot and port
for a configured port-channel, and name is an alphanumeric string up to 15 characters. This
command is used to modify the name that was associated with the port-channel when it was
created.
Format
port-channel name { | all}
Mode Global Config
protocol group
This command attaches a to the protocol-based VLAN identified by . A group
may only be associated with one VLAN at a time, however the VLAN association can be changed.
Default none
Format
protocol group
Mode VLAN database
no protocol group
This command removes the from this protocol-based VLAN group that is identified by
this <groupid>.
Format
no protocol group
Mode
VLAN database