NETGEAR 7300 Series - Manual (Page 193)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands 9-11
202-10009-01_060204
Default 4
Format arp retries <0-10>
Mode
Global Config
no arp retries
This command configures the default ARP count of maximum request for retries.
Format no arp retries
Mode
Global Config
arp timeout
This command configures the ARP entry ageout time.
The value for is a valid positive integer, which represents the IP ARP entry ageout time
in seconds. The range for is between 15-21600 seconds.
Default 1200
Format arp timeout <15-21600>
Mode
Global Config
no arp timeout
This command configures the default ARP entry ageout time.
Format no arp timeout
Mode
Global Config
auto-summary
This command enables the RIP auto-summarization mode.
Default Enabled
Format
auto-summary
Mode Router RIP Config