NETGEAR 7300 Series - Manual (Page 306)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-18 IS CLI Mapping
202-10009-01_060204
Interface
Config
no ip rip authentication
Routing config router rip interface
defaultmetric <0-15> Router
RIP
Config default-information originate
Routing config router rip interface mode
Interface
Config ip rip
Interface
Config
no ip rip
Routing config router rip interface version
receive both | none> Interface
Config ip rip receive version {rip1 | rip2 | both
| none}
Interface
Config
no ip rip receive version
Routing config router rip interface version
send none> Interface
Config ip rip send version {rip1 | rip1c | rip2 |
none}
Interface
Config
no ip rip send version
Routing config router ospf virtif create
Router
OSPF
Config area virtual-link
[authentication [none |
{simple } | {encrypt
}]] [hello-interval <1-65535>]
[retransmit-interval <0-3600>]
[transmit-delay <0-3600>]
[dead-interval <1-65535>]
Routing config router ospf virtif interval
transdelay
<0-3600>
Routing config router ospf virtif
authentication
[key]
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax