NETGEAR 7300 Series - Manual (Page 175)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-109
202-10009-01_060204
Last EAPOL Frame Version The protocol version number carried in the most recently
received EAPOL frame.
Last EAPOL Frame Source The source MAC address carried in the most recently
received EAPOL frame.
EAP Response/Id Frames Received The number of EAP response/identity frames that
have been received by this authenticator.
EAP Response Frames Received The number of valid EAP response frames (other than
resp/id frames) that have been received by this authenticator.
EAP Request/Id Frames Transmitted The number of EAP request/identity frames that
have been transmitted by this authenticator.
EAP Request Frames Transmitted The number of EAP request frames (other than
request/identity frames) that have been transmitted by this
authenticator.
Invalid EAPOL Frames Received The number of EAPOL frames that have been
received by this authenticator in which the frame type is not rec-
ognized.
EAP Length Error Frames Received The number of EAPOL frames that have been
received by this authenticator in which the frame type is not rec-
ognized.
show dot1x users
This command displays 802.1x port security user information for locally configured users.
Format show dot1x users
Mode Privileged EXEC
User Users configured locally to have access to the specified port.
show radius
This command is used to display the various RADIUS configuration items for the switch as well as
the configured RADIUS servers. If the optional token 'servers' is not included, the following
RADIUS configuration items will be displayed.
Format show radius [servers]
Mode Privileged EXEC