NETGEAR 7300 Series - Manual (Page 219)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands 9-37
202-10009-01_060204
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format show bootpdhcprelay
Mode
Privileged EXEC and User EXEC
Maximum Hop Count Is the maximum allowable relay agent hops.
Minimum Wait Time (Seconds) Is the minimum wait time.
Admin Mode Represents whether relaying of requests is enabled or disabled.
Server IP Address Is the IP Address for the BootP/DHCP Relay server.
Circuit Id Option Mode Is the DHCP circuit Id option which may be enabled or disabled.
Requests Received Is the number or requests received.
Requests Relayed Is the number of requests relayed.
Packets Discarded Is the number of packets discarded.
show ip brief
This command displays all the summary information of the IP. This command takes no options.
Format show ip brief
Mode
Privileged EXEC and User EXEC
Default Time to Live The computed TTL (Time to Live) of forwarding a packet from
the local router to the final destination.
Router ID Is a 32 bit integer in dotted decimal format identifying the router,
about which information is displayed. This is a configured value.
Routing Mode Shows whether the routing mode is enabled or disabled.
IP Forwarding Mode Shows whether forwarding of IP frames is enabled or disabled.
This is a configured value.
show ip interface
This command displays all pertinent information about the IP interface.
Format
show ip interface
Mode Privileged EXEC and User EXEC