No radius server retransmit, Radius server timeout, No radius server timeout – NETGEAR 7300 Series User Manual
Page 170: Show accounting, No radius server retransmit -104, Radius server timeout -104, No radius server timeout -104, Show accounting -104
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-104
Switching Commands
202-10009-01_060204
Format
radius server retransmit
Mode
Global Config
no radius server retransmit
This command sets the maximum number of times a request packet is re-transmitted, when no
response is received from the RADIUS server, to the default value, i.e. 10.
Format
no radius server retransmit
Mode
Global Config
radius server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted to
the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to
30.
Default
6
Format
radius server timeout
Mode
Global Config
no radius server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted to
the RADIUS server if no response is received, to the default value, i.e. 6.
Format
no radius server timeout
Mode
Global Config
show accounting
This command is used to display the configured RADIUS accounting mode, accounting server and
the statistics for the configured accounting server.
Format
show accounting [statistics
Mode
Privileged EXEC
If the optional token 'statistics
RADIUS accounting server details are displayed.