NETGEAR 7300 Series - Manual (Page 241)

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands 9-59
202-10009-01_060204
ip vrrp ip
This command sets the ipaddress value for a virtual router. The value for is the IP
Address which is to be configured on that interface for VRRP. The parameter is the virtual
router ID which has an integer value range from 1 to 255.
Default There is no default value for ipaddress.
Format ip vrrp <vrID> ip
Mode
Interface Config
ip vrrp preempt
This command sets the preemption mode value for the virtual router configured on a specified
interface. The parameter is the virtual router ID which has an integer value range from 1 to
255
Default Enabled
Format ip vrrp <vrID> preempt
Mode
Interface Config
no ip vrrp preempt
This command sets the default preemption mode value for the virtual router configured on a
specified interface.
Default Enabled
Format no ip vrrp <vrID> preempt
Mode
Interface Config
ip vrrp priority
This command sets the priority value for the virtual router configured on a specified interface. The
priority of the interface is a priority integer from 1 to 254. The parameter is the virtual
router ID which has an integer value ranges from 1 to 255.
Default 100
Format ip vrrp <vrID> priority <1-254>
Mode
Interface Config