No distribute-list out, Distribute-list out, No default-information originate – NETGEAR 7300 Series User Manual
Page 200: Encapsulation, No distribute-list out -18, Distribute-list out -18, No default-information originate -18, Encapsulation -18
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-18
Routing Commands
202-10009-01_060204
no distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Format
no distribute-list <1-199> out {rip | bgp | static |
connected}
Mode
Router OSPF Config
distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Default
0
Format
distribute-list <1-199> out {ospf | bgp | static |
connected}
Mode
Router RIP Config
no distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Format
no distribute-list <1-199> out {ospf | bgp | static |
connected}
Mode
Router RIP Config
no default-information originate
This command is used to control the advertisement of default routes.
Format
no default-information originate
Mode
Router RIP Config
encapsulation
This command configures the link layer encapsulation type for the packet. Acceptable values for
Format
encapsulation {ethernet | snap}
Mode
Interface Config