Nortel Networks Circuit Card User Manual
Page 825

Page 825 of 906
Circuit Card
Description and Installation
838
NTRB21 DTI/PRI/DCH TMDI card
Contents
This section contains information on the following topics:
Physical description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
The NTRB21 (DTI/PRI/DCH) TMDI digital trunk card is a 1.5 Mb DTI or
PRI interface to the CS 1000S, CS 1000M Cabinet, and Meridian 1 PBX 11C
Cabinet. The NTRB21 card has a built-in downloadable D-channel.
The TMDI feature supports the software changes required for CS 1000S,
CS 1000M Cabinet, and Meridian 1 PBX 11C Cabinet to use the new TDMI
pack. The software changes include:
•
a new prompt to replace a function that was handled by a dip switch on
the NTAK09
•
an extra loadware application to handle Layer 1
•
a change to the existing loadware files into 32 bit format from the
original 16 bit format