Nortel Networks Circuit Card - Manual (Page 805)

NTCK16 Generic Central Office Trunk cards Page 805 of 906
Circuit Card Description and Installation
Trunk Data Block
Respond to the prompts in LD 14 as shown:
LD 14 – Trunk Data Block for NTCK16BX. (Part 1 of 2)
Prompt Response Description
REQ: NEW Define a new trunk unit.
TYPE: COT Central Office Trunk
TN Terminal Number
l s c u Format for Large System, Call Server 1000E,
and Media Gateway 1000E, where l = loop,
s = shelf, c = card, u = unit
XTRK
(See note 1 on
page 806 .)
XCOT Type is IPE COT
CDEN (8D) Card density is 8D (default).
SIGL LOP Loop start signaling
BTID
(See
page 807 .)
Xx Enter the country busy tone ID:
Tortola, Brazil = 10
Mexico = 10 or 08 (depending on CO)
Singapore = 11
Ireland = 3 or 9 (depending on CO) Kuwait,
Chile, Venezuela, Indonesia, Thailand,
Korea = 06. Argentina = 12 or 07, Turkey = 14
SUPN (NO) YES Supervision yes (no)
STYP BTS
BAT
Busy tone supervision enabled
Loop break supervision enabled
CLS (LOL) SHL Attenuation Pads In, (Out)