Connecting apple macintosh to the dac, Upgrading systems – Nortel Networks Circuit Card User Manual
Page 522
Page 522 of 906
NT7D16 Data Access card
553-3001-211 Standard 3.00 August 2005
Connecting Apple Macintosh to the DAC
The Apple Macintosh can be connected with twisted pair wire to a port of a
NT7D16 Data Access Card (DAC) to allow access to the switching
capability. The Macintosh can then access local or remote terminals, personal
computers, hosts, and peripherals.
shows the 9-pin subminiature D (DB9) connection to
the Macintosh. Figure 103 on
shows the mini-8 DIN connection to
the Macintosh.
Upgrading systems
The following explains when and how to upgrade your system to support the
DAC. Ports 0, 1, 2, and 3 of the DAC will work in any standard 16-pair IPE
slot (connect directly to the MDF).
AUTB
ON
ON
BAUD
9600
4800
DCD
OFF
OFF
PRM
KBD ON
KBD ON
DEM
DCE
DCE
DLNG
FRN
FRN
KBD
ON
ON
WIRE
OFF
OFF
PBDO
OFF
OFF
Table 172
Print out example (Part 2 of 2)
DBASE
R-232 or R-422
UPLOAD
R-232 or R-422
Note: The Upload parameters are printed only when a single TN is
specified.