Nortel Networks Circuit Card User Manual
Page 667

Page 667 of 906
Circuit Card
Description and Installation
680
NT8D41AA Serial Data Interface
Paddle Board
Contents
This section contains information on the following topics:
Physical description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector pin assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring the SDI paddle board . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
The NT8D41AA Serial Data Interface (SDI) paddle board provides two
RS-232-C serial ports. These ports allow communication between the system
and two external devices. The SDI paddle board is usually used to connect the
CS 1000S, CS 1000M, and Meridian 1 system to the system administration
and maintenance terminal. It can also be used to connect the system to a
background terminal (used in the hotel/motel environment), a modem, or to
the Automatic Call Distribution (ACD) or Call Detail Recording (CDR)
features.
The SDI paddle board mounts to a special socket on the rear of the backplane
of the following modules:
•
NT5D21 Core/Network module